Firmware Downloads (HeliOS-W2R: Spark W2 Mini)

Firmware Downloads (HeliOS-W2R: Spark W2 Mini)

Supported models

The firmware on this page applies to the following Wi-Fi product models:
   
SP-W2M-AC1200-XXX (Spark Wave 2 Mini AC1200)
SP-W2M-AC1200-PoE-XXX (Spark Wave 2 Mini AC1200 w/PoE) 

Service Releases v2.3.0 (Beta)


2.3.0 Change Log
March 22, 2021
  • Add support mDNS discovery
  • Add support for wireless scheduler
  • Add option to hide SSID when WAN disconnected
  • Add support for AutoWDS
  • Add support multiple VLAN over PPPoE
  • Enhanced the Smart Isolation



Service Releases v2.2.0

Downloads

<download temporarily removed>

2.2.0 Change Log
June 3, 2019
  • Fixed Cloud registration issues. 
  • Fixed Hotspot issues
  • Fixed VLAN 100 passthrough
  • Fixed ETH1 LED always on
  • Add VLAN tag option in Internet Settings
  • Add support mDNS discovery
  • Add Support for wireless scheduler
  • Add Option to hide SSID when WAN disconnected


Service Releases v2.1.x

Service Release v2.1.6


2.1.6 Change Log
Sept 27, 2018
  • Improved device (de)registration to/from cloud handling.
  • Fixed config apply races when configuring from cloud.
  • Increased number of allowed VLANs in GUI to 16.
  • Reviewed and updated client info caching methods.
  • Fixed interface state reporting in statistics.
  • Improved periodic task scheduling and execution.
  • Fixed memory leak when handling kernel events.
  • Fixed service watchdog process duplication.
  • Fixed wireless driver unload issues.
  • Fixed invalid connection state detection in STA mode.
  • Fixed stats collector lockups.

Service Release v2.1.5

<download removed, please use latest firmware>

2.1.5 Change Log
Sept 12, 2018
  • Updated probe request caching method

Service Release v2.1.3

<download removed, please use latest firmware>

2.1.3 Change Log
August 27, 2018
  • Fixed an issue where in rare cases, a troubleshooting file task initiated from the Cloud would cause the device to go offline.
  • Updated the channel list regulations for the TW country code.

Service Release v2.1.2

<download removed, please use latest firmware>

2.1.2 Change Log
August 17, 2018
  • Fixed ethernet ports link stated detection, causing incorrect LED states.
  • Fixed SSID configuration, causing intermediate "ghost" SSIDs on devices.
  • Updated clients counting and assoc time calculation.
  • Fixed client addresses learning on ethernet switch, causing parallel link disruptions.
  • Fixed unicode SSID configuration, causing radio down for longer SSIDs.
  • Fixed wireless statistics reporting.
  • Changed client probes push period to 15 seconds.

Known issues

  • Configuring VLANs 8, 9, 100 does not work.


Release v2.1.0

June 5, 2018

Downloads

Change Log

  • Support added for the SP-W2M-AC1200-PoE model
  • Fixed SNMP config keys migration
  • Update channel utilization computation in multi SSID setups
  • Added RADIUS DAE support
  • Fixed hotspot startup without RADIUS server enabled
  • Fixed max clients limit configuration
  • Improved wireless driver logging
  • Removed AMPDU control from GUI
  • Fixed VLAN traffic passing through on the SP-W2M-PoE
  • Clean up sysupgrade persisting files list
  • Fixed ethernet link detection on SP-W2M-PoE
  • Fixed traffic charts data reporting
  • Fixed wireless statistics reporting in GUI

Known Issues

  • SP-W2M-PoE always reports ethernet port autoneg as being disabled in the local web GUI
  • There is high CPU usage in client mode



Service Releases v2.0.x

Service Release v2.0.3

2.0.3 Change Log
May 7, 2018
  • Added support for the new smart isolation "Strict internet access" option to both the LANs and hotspot configuration
  • Fixed miscellaneous GUI statistics
  • Fixed cloud statistics reporting
  • Fixed channel utilization statistics
  • Fixed firewall configuration races
  • Fixed some issues with secondary VAP configuration
  • Fixed clients connectivity issues using TKIP/CCMP cipher
  • Added RADIUS accounting interim interval setup
  • Fixed RADIUS accounting stop event packet counters
  • Various client mode connectivity fixes
  • Updates for the hotspot splash page
2.0.2 Change Log
April 8, 2018
  • Fixed client RSSI/SNR reporting

Known issues

  • MacBook connectivity issues.



Release v2.0.1

February 20, 2018

Downloads

Change Log

Beta Release (v2.0.1-1270)
  • Various cloud statistics fixes.
  • Fixed remote TS fetching support.
  • Miscellaneous GUI configuration fixes.
  • Fixed probe request reported SSID as host VAP SSID.
  • Added probe request HTTPS server push support.
  • Fixed telnet startup configuration.
  • Fixed LEDs activity identification on WiFi interfaces.
  • Fixed an issue where sysupgrade caused partial config loss in some cases.
  • Reduced required MAC allocation to 5.
  • Updated TH country EIRP limits.
  • Updated TxPower limit tables.
  • Fixed N-mode reset after site survey.
  • Fixed various kernel warnings
  • TxPower control rework.
  • Fixed Client mode WPA2 Enterprise security.
  • Fixed invalid probe request SSID in "Client" mode.
  • Added UTC timestamp field into probe data.
  • Added VLANs configuration fixes.
  • Added Hotspot configuration fixes.
  • QoS and power saving configuration fixes.
  • Added Client isolation support.
  • Added Wireless ACL support.
  • Added Radius MAC ACL support.
  • Added OT country support.
  • Added Min client signal support.



    • Related Articles

    • Firmware Downloads (HeliOS: Spark, SunSpot, SkyFire, Gateway)

      Supported Models The firmware on this page applies to the following Wi-Fi product models: SunSpot AC1200 /  N300 Spark AC750 SkyFire AC1200 / AC866 Gateway AC1200 Release v1.4.2 March 13,2020 1.4.2 Donwnloads Download SunSpot v1.4.2 Firmware Download ...
    • Firmware Downloads (HeliOS-W2: Spark W2, SunSpot W2)

      Supported models The firmware on this page applies to the following Wi-Fi product models: Spark W2 AC1200 SunSpot W2 AC2600 Release 3.0.1   Downloads Download Spark W2 3.0.1-4649 Firmware Download SunSpot W2 3.0.1-4649 Firmware Change Log April 23, ...
    • Spark Wave2 Mini AC1200 Product Info and Links

      Introduction The Spark™ AC Wave2 Mini is the most cost-effective, covert, cloud-managed 802.11ac Wave2 access point on the market. he sleek design of the Spark™ AC Wave2 Mini allows it to be placed inconspicuously in both offices and homes, bringing ...
    • Firmware Archive (HeliOS: Spark, SunSpot, SkyFire, Gateway)

      Release v1.0.5 October 29, 2015 Downloads Download SkyFire v1.0.5 Firmware (No longer available) Download SunSpot v1.0.5 Firmware (No longer available) Change log New Features: We're changing the way that client connection events are reported so that ...
    • Spark AC750 and Spark N300 Product info and links

      Introduction Radios Spark™ AC750 Spark™ AC750 (with 3AF) Spark™ N300 5Ghz Yes Yes No 2.4Ghz Yes Yes Yes Max speed 750 Mbps 750 Mbps 300 Mbps I/O Interfaces 1x1000M Ethernet (PoE in) 2x100M Ethernet 1xUSB port for accessories 12V DC Input Downloads ...
      Didn't find what you were looking for?
    Or
    Email Us: support@ignitenet.com
    (Please remember to submit TS file)
    (Please note, by clicking 'Create Support Ticket' you will be redirected  to our new Edgecore System Portal, please register your ticket via our Edgecore System as IgniteNet is now part of Edgecore.)