What is the default IP address and user name and password of the MetroLinq?

What is the default IP address and user name and password of the MetroLinq?

The MetroLinq by default is set up as a DHCP client.  If no DHCP server is available it reverts to the fallback IP address 192.168.1.20. To access the MetroLinq's web management interface, follow these steps:

1. Use your web browser to connect to the management interface using the IP address assigned by your DHCP server. If the MetroLinq is not on a network with a DHCP server, you can access it at the fallback IP address 192.168.1.20 (be sure to change your IP to 192.168.1.x if necessary).

2. Log in to the interface by entering the default user name “root” with the password “admin123”, then click Login.  

**Note if a Metrolinq radio is added to the cloud, the local login password will change to the auto generated site specific password that the cloud pushes to all devices on that site.  Go to the device configuration page on the cloud and then go to "Local Logins" to see or change the password.
    • Related Articles

    • Can I reset my MetroLinq to factory defaults from via SSH?

      Yes, you can reset your MetroLinq to factory defaults via SSH by: 1. SSH into the device with your administrator user name and password (default pair is "root", "admin123" respectively). 2. Use the command "reset_to_defaults.sh -y" to reset your ...
    • MetroLinq 2.5G 60 Firmware

      Supported Models The firmware on this page applies to the following MetroLinq models:   ML2.5-60-35-XX ML2.5-60-19-XX ML2.5-60-BF-18-XX  Upgrade Alerts Please read the following message carefully before upgrading! Devices running firmware versions ...
    • MetroLinq 10G Omni Firmware

      Supported Models The firmware on this page applies to the following MetroLinq models:  ML-60-10G-360-XX Version 2.4.2 May 11, 2020 Downloads 2.4.2-4179 Release Notes NOTE: Upgrade client units first Fix 2.4Ghz can not be disabled issue Fix TX power ...
    • MetroLinq 60 One (ML1) & MetroLinq 60 LW (ML-60-LW) Firmware

      Supported Models The firmware on this page applies to the following MetroLinq models:   ML-60-LW-XX ML1-60-XX Version 2.4.2 May 11, 2020 Downloads ML 60 LW -2.4.2-4531 ML 60 One - 2.4.2-4531 Release Notes Fix 2.4Ghz can not be disabled issue Fix TX ...
    • MetroLinq Installation and Alignment Tutorial

      This tutorial provides a guide to installation and alignment of MetroLinq products. Mounting The mounting structure to which the MetroLinq mounting bracket is attached should be plumb (not crooked) and stable to avoid polarization mismatch. Choosing ...
      Didn't find what you were looking for?
    Or
    Email Us: support@ignitenet.com
    (Please remember to submit TS file)
    (Please note, by clicking 'Create Support Ticket' you will be redirected  to our new Edgecore System Portal, please register your ticket via our Edgecore System as IgniteNet is now part of Edgecore.)