How do I discover the MetroLinq devices in my network?

How do I discover the MetroLinq devices in my network?

You can use our discovery tool found here: Discovery Tool

    • Related Articles

    • MetroLinq 2.5G 60 Firmware

      Supported Models The firmware on this page applies to the following MetroLinq models:   ML2.5-60-35-XX ML2.5-60-19-XX ML2.5-60-BF-18-XX  Upgrade Alerts Please read the following message carefully before upgrading! Devices running firmware versions ...

    • MetroLinq 10G Omni Firmware

      Supported Models The firmware on this page applies to the following MetroLinq models:  ML-60-10G-360-XX Version 2.4.2 May 11, 2020 Downloads 2.4.2-4179 Release Notes NOTE: Upgrade client units first Fix 2.4Ghz can not be disabled issue Fix TX power ...

    • Does MetroLinq require Line-Of-Sight (LOS) between devices?

      MetroLinq requires clear LOS (see also Fresnel Zones) for the 60 GHz link to work properly. You may be able to connect devices on the 5 GHz or 2.4 GHz interfaces with some obstructions, but distance and wireless performance will likely be affected. 

    • Do MetroLinq devices have a ground point?

      For most MetroLinq models, grounding can be accomplished by either grounding the mounting structure to which the mounting bracket is attached, or attaching a grounding wire directly to the grounding point on the unit.

    • Does MetroLinq support VLAN?

      Yes, MetroLinq will allow VLAN traffic to pass through, and the MetroLinq also has a Management VLAN option that can be enabled in the Network -> Internet Settings.