Do I need the aiming scope for my MetroLinq?

Do I need the aiming scope for my MetroLinq?

While not required, the MetroLinq Alignment Scope, ICC-SCOPE-9X50, significantly lessens the challenge of antenna alignment by speeding up the initial stage of the alignment process. Once the scope is centered on the remote unit, only a small amount of fine-tuning is typically needed. The MetroLinq Alignment Scope saves time and money by helping to eliminate costly site re-visits and re-climbs, and is therefore highly recommended, especially for longer links.  It's a must with the 35cm radios, the beamwidth is just 1 degree and very hard to align without the assistance of the scope.



    • Related Articles

    • MetroLinq Alignment Scope

      Introduction The MetroLinq™ Alignment Scope speeds up the aiming process, which is critical for deployment of 60 GHz links. Other helpful uses include verifying optical line of sight for the link, ensuring local mount placement viability, and ...
    • MetroLinq Installation and Alignment Tutorial

      This tutorial provides a guide to installation and alignment of MetroLinq products. Mounting The mounting structure to which the MetroLinq mounting bracket is attached should be plumb (not crooked) and stable to avoid polarization mismatch. Choosing ...
    • MetroLinq 10G Omni Firmware

      Supported Models The firmware on this page applies to the following MetroLinq models:  ML-60-10G-360-XX Version 2.4.2 May 11, 2020 Downloads 2.4.2-4179 Release Notes NOTE: Upgrade client units first Fix 2.4Ghz can not be disabled issue Fix TX power ...
    • MetroLinq 2.5G 60 Firmware

      Supported Models The firmware on this page applies to the following MetroLinq models:   ML2.5-60-35-XX ML2.5-60-19-XX ML2.5-60-BF-18-XX  Upgrade Alerts Please read the following message carefully before upgrading! Devices running firmware versions ...
    • MetroLinq 5 LW Firmware

      Supported Models The firmware on this page applies to the following MetroLinq models:   ML-60-5-LW-XX Version 2.3.5 June 27, 2019 Downloads 2.3.5-4023 Release Notes NOTE: Upgrade client units first Fixed an issue where a wireless link isn't possible ...
      Didn't find what you were looking for?
    Or
    Email Us: support@ignitenet.com
    (Please remember to submit TS file)
    (Please note, by clicking 'Create Support Ticket' you will be redirected  to our new Edgecore System Portal, please register your ticket via our Edgecore System as IgniteNet is now part of Edgecore.)